-
REMOVE 99% BUBBLES: Are you tired of bubbles ruining your resin creations? Compact Size Desktop Resin Bubble Remover can help you quickly solve this problem. In just 10 mins, it deeply removes 99% of bubbles, leaving your resin smooth and flawless.
-
EASY OPERATION: With a simple push button, you can easily to quickly start your debubbling journey.
-
USER-FRIENDLY DESIGN: With a 2-liter capacity, it can fit all standard mixing cups up to 500ml/16oz. The storage size is much smaller than conventional vacuum machines, making it more convenient for home use. The high-transparency container body allows you to see the entire vacuuming process clearly.
-
SUPERIOR QUALITY: Made with the best ultra high-strength PC material, this airless machine can withstand a high negative pressure of -95kPa without any safety concerns. The internal noise reduction structure effectively reduces noise to no more than 75 decibels. It is a faithful companion to all your resin projects.
-
NOTICE: If there are still a few air bubbles on the resin surface after the machine has finished working, they can be removed by spraying alcohol, using a torch / heat gun, or allowing it to settle.
Operating Instructions:
-
Plug in the power; the red power indicator will turn on for a self-check.
-
Press the power button to start extracting air. If the vacuum is normal (OK), the power indicator will change from red to green; otherwise, the red light will flash rapidly and the buzzer will sound 10 times as an alarm. After about 3 minutes, the power button will light up, indicating that the vacuum level has reached the effective defoaming threshold. Simultaneously, a 10-minute countdown will begin. After 10 minutes, the buzzer will beep 3 times as a reminder, the machine will stop, and it will enter pressure-holding mode.
-
Press the air release button to start releasing the vacuum. The air release button will light up. After 30 seconds, the lid can be opened, and the machine will enter standby mode.
-
During operation, if the vacuum level fails to reach the effective defoaming value, the buzzer will sound 10 times as an alarm, while the red and green lights flash alternately and continuously. The vacuum pump will stop working until any button is pressed to clear the alarm, after which the lights will turn off and the machine will enter standby mode.
Caution: the max height of liquid is 80mm. Don't exceed this height.
Low Viscosity Liquid only (Epoxy resin, Liquid Silicone Rubber, Squishy Gel )
Not for quick dry PU resin.
For High Viscosity resin, please use Degassing Vacuum Chamber or Pressure Pot.
