Multi-Purpose Mould Release Agent Net: 450ml

Material Categories

Thermosetting Resins

Epoxy resin, unsaturated polyester resin, phenolic resin, and organic silicone resin based on thermosetting resins.

Thermoplastic Resins

PE, PP, PVC, PS, ABS, PC, PA, POM, PET, FR fluorine resin, polyimide resin, etc.

Polyurethane

TPU, PU rigid foam/semi-rigid foam/soft foam, MPU, CPU, molded polyurethane elastomers, polyurethane shoe sole materials, etc.

Rubber & Silicone

SBR, NBR, EPDM, CR, FKM, TPR, Q-type silicone rubber, etc.

Other Materials

Carbon fiber, synthetic resins, and other composite materials.

Flash Point: -4°C, Boiling Point: 80°C,
High Temperature Resistance: 400-550°C,
Film Thickness: 0.1um-1um, Zero Transfer, No Residue.

Applicable Molds

Non-Metal Molds Include:

Silicone molds, plastic molds, glass molds, resin molds, acrylic molds, PTFE molds, etc.

Best for Polyurethane Resin

For industrail use only. Oil-Base.

DANGER: FLMMABLE AEROSOL. CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED.
Keep away from fire/heat/sparks/open flames/hot surfaces, no smoking, don’t spray on an open flame or ther igition source. Protect from sunlight. Don’t expose to temperetures exceeding 50 °C. Pressuried container: don’t pierce or burn even after use. May be fatal if swallowed and enters airways. Do not ingest. May cause drowsiness or dizziness,. Avoid breathing dust/flume/gas/mist/vapours/spray. Use only outdoors or in a well-ventilated area. Causes skin irriation. Wash thoroughly after handing. Wear eye and skin protection.

FIRST AID:
Swallowing: Do not induce vomitting; call for medical help immediately.
Inhalation: Move patient to fresh air, if symptoms persist consult a doctor.
Skin Contact: Immediately wash with water and soap and rinse thoroughly.
Eye contact: Rinse opened eyes for several minutes under running water. If symptoms persist consult a doctor.