Mould Putty - Mould Making Shore A 30

All stock in our shop at East Tamaki, Auckland.

• Suitable for repairs & renovations, arts. Art and restoration: recommended for accurate reproduction of vertical surfaces. 
• Suitable for hobby constructions, small moulds
• Easy to use
• Excellent anti-stick effect.
• Final cure at room temperature

Mix ratio: 100 (Base): 4 (Catalyst) by weight
Final Color: Beige-yellowish
Pot life: 90 mins
Demould time: 9-10 hours (room temp)
Full mechanical properties and hardness will be achieved after 24 hours of mixing
Hardness: 30 shore A
Tensile strength: 0.9 ± 0.1 N/mm2
Elongation: 200 ± 20 %
Dimensional variation after 5 days at 23 ° C : < 0.57 %

Silicone does not flow down, is not sticky and adheres to itself: a new layer of silicone can be attached to the old one within 24 hours. 

Please hit here If you need Casting Box for Silicone Mould Making Casting.

Click here for MSDS.

Questions before you buy

Which options are available?

Size: 500g Pack, 1kg Pack. Select the required option before adding to your cart; availability is shown on the product page.

What should I check before ordering?

Review the product details above for the stated dimensions, pack contents and intended application. If a specification or compatibility detail is not listed, contact Resin Art NZ before ordering.

Where should I check preparation and use instructions?

Follow the instructions supplied with this product. For materials used together, check the instructions for each material rather than assuming that mixing methods, compatibility or curing conditions are interchangeable.