M4601 Silicone Rubber

M4601 Silicone Rubber by Barnes. Elastosil® M4601 is perfectly suitable for all moulds of models with pronounced undercuts that are to be reproduced in casting resins.

Choose your option

• SIZE: 1kg, 5kg, 30kg

Product details and application notes

Elastosil® M4601 is perfectly suitable for all moulds of models with pronounced undercuts that are to be reproduced in casting resins.

M4601 is also a Food Grade Silicone

Recommended for: Food Grade, Concrete, Plaster, Epoxy, Polyurethane, Polyester
Potlife & Demould: Work time – 90 mins / Demould time – 12 hrs
Hardness & Type: Shore A28 +/-2 Silicone Elastomer, 20000cps

Pourable, addition-curing, two component silicone rubber that cures at room temperature.

• Very Good Flow
• Low Shore A Hardness (approx 28)
• Fast non-shrink cure which can be accelerated considerably by the application of heat
• Excellent long-term stability of the mechanical properties of the cured rubber.
• High tear strength
• Outstanding resistance to casting resins.

• WACKER M4601 PART A SDS
  
• WACKER M4601 PART B SDS
  
• M4601 TDS
  
• BARNES SHORE HARDNESS SCALE
  
• M4601 FOOD GRADE LETTER
  

Frequently asked questions

What additional product information should I consider?

Recommended for: Food Grade, Concrete, Plaster, Epoxy, Polyurethane, Polyester Potlife & Demould: Work time – 90 mins / Demould time – 12 hrs Hardness & Type: Shore A28 +/-2 Silicone Elastomer, 20000cps

Which options can I select?

SIZE: 1kg, 5kg, 30kg. Select the required option on this product page.