Ultra Deep Pour Clear Cast Resin 2 : 1 - Up to 10 cm in a Single Pour

All stock in our shop at East Tamaki, Auckland.

Ultra Deep Pour Clear Cast Resin is Crystal Clear Casting Epoxy Resin or Liquid Glass also Self Levelling, De-forming.

This product is commonly used for "Epoxy River Table, Bar Top" type work, and deep pours.

Mix Ratio: 3 Part A :1 Part B by weight. 48 hour cured at 20°C, will cure quicker in warmer conditions.

Working Time: 50 - 60 minutes.

Up to 10 cm / 30kg in a single pour.

Anti-Yellowing

Please follow the label when pouring.

No pressure for 40-50mm deep pour!

Pigments & dyes can be added.

15kg pack include 2x 5kg Part A and 1x 5kg Part B.

We can offer any buyer for 30 minutes free training in our shop!

See Mini Instruction here.

Heat Management Recommendations for Epoxy Resin Casting:
To prevent excessive heat build-up during curing, please follow these recommendations:
1. Use an ice-water bath: Place the mould in a bucket or container filled with ice water to help dissipate the heat generated during the curing process. Make sure no water enters the resin or mould.
2. Maintain a suitable working temperature: Keep the ambient temperature between 20–25°C.
3. Avoid casting large volumes of pure resin: Where possible, place materials such as wood, stones, or other suitable objects inside the mould to reduce the total volume of resin required. This will help minimise heat generation during curing.
Important: Epoxy resin generates heat through an exothermic reaction during curing. Excessive heat build-up can cause rapid curing, cracking, yellowing, or even thermal runaway.